How to choose materials for customized color printing carton? Let's have a look.

Even if the same quality of paper is used, the results are different due to the different formats of corrugated cardboard. There are four waveforms used internationally, namely cold type, c type, B type and E type. They have good buffering property, certain elasticity and cold secondary parison. But the rigidity and impact resistance are better than mold cooling. B type cold discharge density, formed by corrugated surface, high pressure, suitable for printing; Type E is cold, thin and dense, which shows its strength. The main difference between vessels is the outer diameter, which is closely related to the corrugated type. The production size shall be measured according to the pressure sequence required in the carton customization. The drum groove of the cutter is the groove at the line pressing position and also the center line of the groove. The distance between the two lines is the size of the yield. Conversion from production size to inside diameter and outside diameter can be realized, but they also have their own measurement methods.

In the process of carton customization, there are single panel and double panel, which are single sheet forming frames, usually used for small perimeter cartons; Double spell is also called two pages in a box. Some boxes are too big in circumference, so you need to use two parts to make up the carton. But sometimes in order not to cause waste, the carton factory will use the remaining materials to make two smaller cartons, or even four. Double page boxes are more common than single page boxes, so the area between them is slightly different. The production dimensions of connectors and cartons are determined according to the level of corrugated paper layer and production process, one corrugated board is 40mm, two corrugated boards are 50mm, and three corrugated boards are 50mm.

At present, due to the wide application of cartons, there are many customized manufacturers of cartons, but their scale, carton quality, production technology and wholesale prices are also uneven, so you should pay attention to the following points when selecting.

1. Materials

Before customizing cartons, it is necessary to select appropriate carton materials according to the weight of the goods loaded. Generally, cartons are made of corrugated cardboard, so you can make appropriate choices according to the loading capacity.

2. Thickness

It depends on the thickness and cushioning capacity of the carton. In the case of paper with the same weight, the higher the corrugated height, the better the cushioning performance and the worse the hardness; The shorter the height of the corrugation, the better the cushioning of the paper.

The content of this article comes from the Internet. If you have any questions, please contact us!